Editing User:Eric/sandbox/Engine Trolley (section)

=== Construction Details for VW 600/1 ===

# Cut oll tubes, strip and round bar to dimensions given in lis of parts.
# Bend round bar (8) as shown on drawing, cut off accurately to length and work the flats as indicated (depth 6 mm = <sup>15</sup>&frasl;<sub>64</sub> in.].
# Bend tube (7) as shown on drawing.
# Weld up tubular components (5), (6) and (7) and round bar (8) as shown on drawing.
# Weld longitudinaly halved tubes (10) and square bars (9) to round bar members (8) adjacent to the flats, as shown on the drawing.
# Mark off positions of tapped holes for castors and non-swivelling wheels (|) and (2) on mounting pads (3); drill four 6.5 mm (0.256 in.) holes in each pad and countersink.
# Weld mounting pads (3) to tube ends (5).
# Screw castors and wheels to pads, using countersunk screws (4).
# Paint trolley.
# Grease all bearings.